(ges-mc4tx1fxmm2km) $ UTC FIRE SECURITY [mc-4tx1fxmm-2km] - 4 ETHERNET TO 1 FIBER (2MM) 10 / INDUSTRIAL CONVERTER 2K (ITEM. Models. MC-4TX1FXMM-2KM. 4-Port 10/Mbps to MM fiber. MC-4TX1FXSMKM. 4-Port 10/Mbps to SM fiber. MC-4TX2FX. 4-Port 10/Mbps to drop-. Item #. Manufacturer. UTC / GE Secuirty / Interlogix. Part Number. MC4TX1FXMM2KM. Description. Mc-4Tx1Fxmm-2Km - 4 Rj To 1 Fiber Port (2Mm).
|Published:||15 November 2015|
|PDF File Size:||45.23 Mb|
|ePub File Size:||47.84 Mb|
MC-4TX2FX - Fire Security Products
In this converter provides power to the various network devices at a distance up to meters, whether IP-surveillance cameras, wireless access points or IP-phones with the power consumption to Terminal Block with Screw Clamps.
Terminal Block with Screw Clamps 2. Automatic re-settable solidstate current limiters C. Solid-state, Independent on each board 2. Module shall be constructed of a metal enclosure with a powder coat. If product is installed under condensation conditions, unit shall have conformal coating applied to the printed circuit board.
DIN Rail kit B. All electronic RJ connectors mc 4tx1fxmm 2km be covered with dust caps and remain on the fixed port until installing cable connectors to it B. Mc 4tx1fxmm 2km optical connectors shall be covered with dust caps and remain on the interface until installing cable connectors to it.
Standalone Module Surface Mount 1.
GE Security MC-4TX1FXMM-2KM 4 Ethernet to 1 Fiber (2MM) 10/100 Industrial Media Converter - 2km
Shall be mounted on a properly prepared surface adequate for the size and weight of module. These switches have been engineered with a 10Gbps or 16Gbps internal non blocking switch fabric, combined mc 4tx1fxmm 2km 9K jumbo frame support for fast mc 4tx1fxmm 2km reliable data transfer for unmanaged network applications.
Each port configuration is offered in a wide operating temperature version.
When migrating from analog to IP, mc 4tx1fxmm 2km converters are a smart way to eliminate the additional material and labor cost of pulling new cable when moving to mc 4tx1fxmm 2km network-based system.
These media converters are engineered with a high-performance switch architecture providing a 1Gbps non-blocking switch fabric to maximize wire-speed packet transfer without risk of packet loss.
The robust design features an industrial-rated enclosure, redundant power, and surge suppression on both power and Ethernet ports.
IFS MC-4TX1FXMM-2Km Ethernet to Fiber Industrial Media Converter
These modules include wall-mount or DIN-rail mounting options and provide reliable and mc 4tx1fxmm 2km operation in harsh environments. Using existing coaxial cable saves time, money and labor by eliminating the need to install new cable. The Ethernet-Over-Coax media converters can also extend the range of Ethernet transmission up to 1.
All optical connectors shall be covered with dust caps and remain on the interface until installing cable connectors to it. Standalone Module Surface Mount 1. Shall be mounted on a properly prepared surface mc 4tx1fxmm 2km for the size and weight of module.
The placement of the unit mc 4tx1fxmm 2km allow provision for cable installation and maintenance as indicated on the approved detail drawings and in compliance with the installation manual.
Shall be mounted on a properly installed DIN Rail adequate for the size and weight of the module. NEVER look into the end of an active optical fiber when using laser light output.
Euro-Tech South Africa - Components
Eye damage can occur. Wear eye protection when cleaving, terminating, and splicing fiber. The number and type - multimode of optical fiber shall meet the requirements of the IFS mc 4tx1fxmm 2km number.
All optical fiber cables shall be properly installed and terminated with the mating optical connectors. The optical link shall be tested with either a power meter, mc 4tx1fxmm 2km a minimum, or OTDR to ensure the link budget overall path loss plus an added 3dB of optical safety margin does not exceed the optical power budget.